Complete solutions for double wall corrugated pipe production. From small diameter cable protection to large infrastructure drainage systems.
Beyond the 7 standard production lines, Suba engineers custom extrusion systems for specific civil engineering and infrastructure applications.
Custom extrusion line for bridge prestressed corrugated pipe and cable protection conduit. Used in civil engineering, bridge construction, and high-voltage cable routing where corrugated metal-substitute profiles are required.
Dedicated extrusion system for drainage corrugated pipe production. Optimized for municipal drainage networks, stormwater management systems, and agricultural drainage infrastructure.
Extruders, die heads, corrugators, moulds, cooling tanks, cutters, stackers — every component for your production line.
Browse All Components
SJ60, SJ75, SJ90, SJ120, SJ150 single screw extruders with special screw design, suitable for PE, PP and other materials. Using buffering mixing section and large L/D ratio 36:1 screws for good plasticization, high output and wide adaptability to raw materials. Bimetallic screw and barrel effectively improve wear resistance and corrosion resistance, achieving longer service life.
View DetailsCorrugated pipes produced by Suba machinery serve critical industries worldwide.
Single-wall corrugated PE and PP conduit produced on the SL180 protects electrical wiring in buildings, residential developments, and industrial installations. Lightweight and flexible, it routes around obstacles where rigid conduit cannot go.
PP and PE double-wall corrugated drainage pipes handle the runoff loads that roads, agricultural fields, and urban developments generate — from small-diameter land drainage to large-bore stormwater collectors. SL180, SL300, and SL600 lines cover the full diameter range.
Flexible corrugated profiles produced on SL180 and SL300 lines route fresh air and exhaust through walls, floors, and ceilings in residential and commercial HVAC systems. Corrugated geometry combines flexibility with resistance to kinking under tight installation bends.
PP and PE double-wall corrugated sewer pipes carry domestic and industrial wastewater from collector branches to trunk mains. The full diameter range across SL180, SL300, and SL600 meets every network tier — from building connections to municipal collector sewers.
Select up to 4 models to compare specifications and find the right production line for your needs.
Selected: 3/4 models
| Specification | SL-180 | SL-600 | SL-1200 |
|---|---|---|---|
| Pipe Diameter Range | ID32–OD200 | ID100–OD630 | ID600–OD1400 |
| Materials | HDPE / PP / PVC | HDPE / PP / PVC | HDPE / PP / PVC |
| Category | Small | Medium | Large |
| Water Cooling | |||
| PCC Control | |||
| Quick Mold Change | |||
| Electric Adjustment | |||
| Coiler Included | Optional | ||
| Perforator | |||
| Haul-Off | |||
| Applications | drainage, sewage | drainage, sewage | drainage, sewage |
| View Details | View Details | View Details |
ID32–OD200
ID100–OD630
ID600–OD1400
Need help choosing the right production line?
Get Expert ConsultationCorrugated pipe has many advantages compared with similar pipes due to its material HDPE/PP and special pipe profile.
Pipe is with less weight and machine is with closed loop water cooling system, thus achieves high production speed.
Due to the structure of corrugated pipe, it has a higher ring stiffness than smooth pipes at the same weight.
From ID 32 mm to OD 2000 mm corrugated pipe production for different application.
Double wall corrugated pipe saves material compared to HDPE pipes at same diameter and same ring stiffness.
Double layer corrugated pipe has a deflection of up to 30%.
Our engineers can help you select the right production line for your application requirements.
Contact us for a free consultation and quote
Material is extruded from the extruder through the inner and outer dies of the double layer pipe die head. Suba die head short channel design (reduced by 25%) effectively lowers melt pressure, achieving low temperature, low pressure extrusion — production efficiency 25% higher than conventional die heads. Dynamic inner and outer wall thickness adjustment without stopping extruders.
View DetailsTwo corrugated pipes can be easily joined by rubber ring.
PE or PP both applicable; Virgin and recycled high density polyethylene can be both used depending on different usage.
With less weight, corrugated pipes are much easier for handling, and no need heavy equipment to install which achieves an easy installation.
Double wall corrugated pipes are widely used for drainage, sewage, cable protection, water collection and etc.
With smooth inside layer, double wall corrugated pipes ensures a good water flow.
Comprehensive support for our customers worldwide
Qingzhou Suba Machinery Co., Ltd. offers 24-hour online service and prompt problem-solving solutions.
Our engineering team travels to your facility worldwide to oversee installation, commissioning, and comprehensive operator training.
Technical guidance on usage, maintenance, and optimization. We ensure supply of spare parts for all equipment.
PCC remote control system enables our engineers to diagnose and solve problems remotely, minimizing downtime.
We actively collect and respond to customer feedback, continuously improving our products and service.
Our professional engineers travel to your facility anywhere in the world for installation, training, and ongoing technical support.
Get Support
Full extrusion line systems for HDPE/PP double wall corrugated pipes. From ID32mm cable protection to OD2000mm drainage infrastructure.
Browse All Lines
SL180 double wall corrugated pipe extrusion line produces OD40mm – OD180mm single and double walled corrugated pipes. The corrugated pipe machine achieves high production speed with horizontal structure, water cooling and extrusion technology. The DWC corrugated pipe machine uses 4th generation water cooling technology; all mould blocks have cooling water inside for recycling, cooling efficiency is good, and corrugated pipe production speed is high.
The SL600 double wall corrugated pipe production line produces ID90mm-ID600mm HDPE/PP double wall corrugated pipes. The products adopt horizontal structure, water cooling corrugator technology and extrusion technology to achieve high-speed production. Suba SL600 pipe corrugator machine produces a bigger range of corrugated pipes by optimized structure. Invention patents ensure better operation and adjustment system.
The SL1200 double wall corrugated pipe production line produces ID600mm-ID1200mm HDPE/PP double wall corrugated pipes. The products adopt horizontal structure, water cooling technology and extrusion technology to achieve high-speed production. Suba SL1200 DWC corrugated pipe machine produces a bigger range of corrugated pipes by optimized structure. Invention patents ensure better operation and adjustment system.
